Handheld Wifi Setup

Setting up Internet Access for the Motorola MC 3090

1. Turn on the Hand Held by holding down the red circular button in the bottom right corner of your device.
2. Using the stylus attached to the strap on the back of the device, click blue/red icon next to battery on the bottom right side if the task bar until menu opens.
3. Click "Find WLANs". The WLAN is the wireless router used in your office.
4. Double-Click the correct LAN connection to your location.
5. A pop-up appears. Click "Connect" to view another window labeled "Profile Entry".
6. The name of your wireless network will appear in the Profile ID for both Name and ESSID. Click Next.
7. Under Operating Mode, Select "Infrastucture" in the drop-down. It should say "Allow Any Country". Click Next.
8. Authentication should remain as: "None"
9. Select the encryption of your wireless network. Typcially, this is set as "128-Bit WEP". Key Index should be "1". If you have a 26 character key, do not select the "Use Passkey" checkbox. Click Next.
10. You will see 6 text boxes with asterisks (****) inside each box. For users with a 26 character key, begin entering the 26 character key into each box. The cursor will move into the next box as you continue typing. Click Next when complete.
11. Select the appropriate option ("Static" or "DHCP" for dynamically changing IP addresses) for your Wireless IP address. Click Next.
12. If you selected "DHCP", skip to the next step. If you selected Static, enter the IP address of the wireless connection and the Subnet Mask. Click Next.
13. Transmit Power should be set to "Automatic". Click Next.
14. Battery Usage needs to be set to "CAM" for the strongest wireless Internet connection capabilities.
15. Click Finish.
16. Close the Manage Profiles window by clicking the "X" in the upper right corner.
17. You are now ready to scan tickets using your Motorola MC 3090.